Going with a cheap used system, and then adding an Intel a310 is a good start. For getting drives, look into getting some external Seagate drives, popping them open, and using them internally. Just a couple ideas 😊
- 1 post
- 64 comments
- 19 days
- 1 month
Tdarr is a pretty fun automation tool if you Wana try. Basically I down scale to 1080p if it’s higher, then I rencode to av1 at 8mbps or lower depending on current bitrate. I also keep all audio and subtitle streams how they were
- 1 month
Does it help to point out this is vinyl backed foam 😉 really thin vinyl sheet on it, but it helps
- 1 month
Yea it’s mobile. Away from home for a bit 😅
- 1 month
It’s in the middle of rencoding my library, should finish at some point and return to low usage
- 1 month
I get about the same affect by placing a layer of the foam on the wall behind the fans. But you’re totally right. Without that lil bit the fan noise from the intake and exhaust was a lil noticeable
- 1 month
With the big tower cooler it now has in the server it barely touches 80c under load. As for sound, I can take a recording when I get home later this week if anyone’s are still interested
- 1 month
Two of the drives are 18tb I got cheap 😂 so maybe in a decade I’ll get that 8tb of space
- 1 month
I keep my place at 74, and basically have a per room heat pump to never have the temp be an issue even on a 108 day. I’ve been running the setup for over two years now and have monitored thermals the whole time and have never had an issue. I understand the concern, and had the same concerns at first too, but the results don’t lie. It’s just very well tuned for it’s environment
- 1 month
I9 11900k and about 18 spereate sata drives. The lil amounts add up 😂
- 1 month
They basically just sit and spin with all reads going to a cache nvme drive 😊 should live as long as possible
- 1 month
Was just what I was experimenting with when I built it a few years ago. Never gave may issues so I’ve just stayed with it. Would be nice to be able to mismatch my drive size though
- 1 month
It’s alot of fun. NSFW makes some really easy to build in ITX cases if you ever want to dabble. My req though is too put a baffle made of stuff foam to force cool air in for the gpu. I’ll post a Pic of my main setup when I get home later this week if you want
- 1 month
Lol. I mistyped tennis so many times 😂
- 1 month
Yea, I definitely would have gone z2, but this all started with the drives, and slowly expanded into this monster. But so far it’s been running smooth. The drives were added at different times to so they shouldn’t fail at the same time (hopefully 😂)
- 1 month
It just had a very undersized cooler at the time (pics of case are hiding here somewhere lol). It would idle normally, but load put it near throttle. Moved to the 9800x3d though in the same case and that performs like a dream

The old GiB vs GB