• 8 posts
  • 97 comments
Joined 3 years ago
Cake day: July 10th, 2023
  • Otw but after replacing the flat Ethernet cable (no change), and while waiting for the vero I switched to connecting to jellyfin / jellycon via its local address instead of its external one (🤦‍♂️) and zero buffering silky smooth everything. I don’t understand why but holding my breath for now while I wait for the vero when I can retire this unit at least to the office tv where it doesn’t have the responsibility of always performing for the family.

  • It’s really neither much too nor very complex at all. I have a home lab stack of mini PCs and raspberry pi’s in my office hooked up to a switch to my router. Among the stack is an intel nuc with a few attached usb hdd, sharing those drives via NFS and Samba and hosting Jellyfin. The same machine serves jellyfin to my other devices and a few family members over the internet. That machine is more than capable for the task. In order to get that media to the living room I have a raspberry pi 4 running libreelec also hard wired to the Ethernet also to the same switch (running through a cable window in the wall). No, I had not heard of the issues with flat Ethernet cables that are otherwise advertised as cat 7 compatible, because I have (some) of the machines networked with flat Ethernet cables. Those are getting replaced.

    For the most part the pi4 libreelec machine handles content fine. But I have a number of multichannel audio, hd not-quite-4k animated movies that do routinely cause buffering issues. It seems most likely upon review and after the comments in this thread that it was a simple bottleneck at the pi4. The same content plays unstuttwring on other more equipped machines on the network. I do think the router is on its way out though and deserves an upgrade but that looks to be an optional next step. I’m replacing the pi as a media machine for now.

  • FWIW I have jellyfin as well already, it’s also on the machine serving the nfs shares. I would expect streaming over lan to always be a lighter load then sending a transcoding request through the internet and back to the machine four feet away, but I could be wrong. I am always curious though what people are using as jellyfin clients for their TVs. How are you actually getting jellyfin into your living room? I had hoped to use a dedicated pi4, and I’ve already gone down the route of trying to boot to a light desktop with an auto loading chrome kiosk window to my jellyfin server, but those results were less than ideal too.