Probably much more involved with the OP5T, but when I looked into running my Note 4 as a display without a battery, I discovered that you just needed to show a couple pins a 3.7V signal and it’d think there was a battery installed. This can be accomplished with a dime-sized voltage converter connected to the input power.

prescription drug commercials

Referencing anal leakage and death while an upbeat jingle plays in the background to some smiling old people playing horseshoes or hiking in nature.

Talk to your doctor today!

Ersatz actually does allow you to do this. Its kinda neat to find old 80s and 90s commercials and mix them in with your 80s and 90s TV shows.

I ran it for a while and it was a little confusing to set up but worked well in the end. I did have some major issues with trying to use it alongside my HDHomeRun (local antenna channels) in Plex. xTeve allows you to combine the two programming schedules into one since Plex only allows for one at a time, but for whatever reason the output would come out all scrambled with shows being tied to the wrong channel. It seemed to work fine in Emby, so it should work fine in Jellyfin, and you likely wouldn’t even encounter this since most people don’t have live TV setup anyways.

To help combat this I’ve created numerous collections in Plex based on commonly shared traits like genre, actors, directors, release decade, holidays and placed these collections at the top of my library. You can even find artwork for all this stuff on The Poster DB. I also make sure to put sequels into their own collections and separate animated TV/movies from all the live action stuff (four separate libraries) to further reduce the wall of choices.

I think Jellyseer gives you the ability to watch trailers or see external links (imdb, tvdb, etc) for the show/movie.

Like others have said, this stuff is really about building a collection not streaming something the moment the idea to watch it pops in your mind. It can replace Netflix but you’d want to build it up first (with plenty of HDD space to do so). Mine is also shared with family and friends so it supplements their watching too.

I also have frigate on proxmox with a Google coral but mine has been rock solid. The only difference is that I use an LXC instead of a VM. I recall there being more issues passing hardware to VMs in Proxmox since they don’t like to share.

I’d definitely skip this in favor of something consumer-grade. You can find used Dell Optiplexes all over the place cheap and stick a large drive inside/outside of it and use it for a couple of years.

A big old server is just going to drain your wallet on both power and parts with equal or worse performance and a lot more complexity for what 99% of home users will use it for.

It sounds like your main goal is probably a media server and an Optiplex will give you an i5 or i7 with QuickSync which works excellent for processing video. RAID isnt really necessary here because you can just download more Linux ISOs if these one are lost, though it can be great later if you buy a bunch more drives and expand into other areas where data is less replaceable.

Can’t say on access behind CG-NAT, as I haven’t ever dealt with it, but Tailscale might work as a free third-party option though that’s just a guess.

I did this with ESPHome on an ESP8266 connected to an IR led for some rope lights that had IR control. The hard part is finding the codes for each control, but there’s a surprising amount of info out there.

You can connect an SSD to these boards and boot from that instead of an SD card. Definitely the way to go especially considering SSDs dont really cost more than SD cards.

I have no familiarity with Yunohost but this is just a matter of separating your services. Have one container with the *arrs, qbit, glutun, and VPN and a separate container with Immich and Nextcloud. I personally use Proxmox with Portainer to run tne containers, but you may be able to just run Portainer on your OS to accomplish the same thing.

You’ll only connect to people who do have port forwarding setup, but nobody else.

There’s also the possibility they’re referring to the current draw through the mobo connector itself frying things. A couple of HDDs at 12V, 10W will be pulling almost 2A which can be a lot for some circuit board traces, but there’s no great way know what the board can handle without documentation from the manufacturer or someone with relevantt engineering experience well above what a typical computer repair shop would have.

If I were OP I would just roll the dice and try it out. Its not as if old Dell office PCs are high dollar items.

Those are the molex to sata power adapters that are a fire hazard. I haven’t ever heard of this type causing issues and have been using them for years and years without issue.

This is what i have. Amcrest cameras tied to an Amcrest NVR which offers remote viewing, recording, and playback and then also tied into Frigate and Home Assistant also for remote viewing, event notifications, etc. I could ditch the NVR but I’d need to get a POE switch and I like having it as a backup.

I followed this dude’s tutorial to get everything setup in Proxmox: https://youtu.be/qmSizZUbCOA

Today I have a huge bottleneck in unpacking and moving. I’ve got 1gb fiber and can saturate it, getting a complete iso in just a few minutes, but then it’s another 30min plus waiting for that to actually be usable.

Are you doing this all manually or using the *arr suite? For me, this process takes a minute or two depending on the size of the files with Proxmox and ZFS but even previously on Windows 10 with SnapRAID it was quick.

Its honestly pretty small for what you can pack inside but they do have smaller options like the Node series. The 304 is around 8"x10"x14" with room for 6 drives.

The third alternative (and best IMO) is to buy a PC case with lots of drive slots and transfer everything into it. With a NAS you’re going to pay a ton of money for the NAS itself which is just laptop-equivalent hardware and a fixed number of drive bays meaning you can’t expand it when it fills up without buying more expensive hardware, and you’ll also be forced into buying matched drives. With an HDD enclosure, you’re spending less money but again fixed on the number of drives while also being somewhat unreliable due to the USB connection.

I use a Fractal Design Define 6 midtower case which can hold around 12 HDDs. For hardware I bought a mobo with the most SATA ports I could get and began slowly buying drives as my storage pool filled up, eventually needing an LSI HBA card to expand the number of SATA connections. This is the best value IMO as the cost is comparable to buying a NAS, you can add drives as you go with a much higher drive capacity, the connection is rock solid, and you can run real PC hardware.

It was definitely not fun stringing Cat6 through the attic, but knowing myself, I probably wouldn’t have stayed on top of battery changes and I also wanted 24/7 recording since a battery powered camera can miss movement and start recording late or not at all. I also need a doorbell camera still but I’ve had trouble finding one that checks all the boxes.