Recently I bought vps which have only ipv6. It’s obviously that I don’t have ipv6 home. So, here is question: how do you interact with such servers?
How do you use only ipv6 server?
English
You must log in or register to comment.
- Im_old@lemmy.worldEnglish2 years
First questio is: can you ask your home internet provider for ipv6?
Otherwise sign up to tailscale and connect your vps server (and your pc/devices) to it.
- InvertedParallax@lemm.eeEnglish2 years
Used to have miredo, which worked pretty well, but think they killed that.
Should still have old 6to4 protocols, they use ipv4 address tricks to get everything working.
- ShortN0te@lemmy.mlEnglish2 years
There are tunnel protocols like 6to4, 6RD and so on to allow you to get an IPv6 connection tunneled to you. Various routers do support it.
Another option is to ask your ISP if he will supply a IPv6 subnet to you.
2 yearshave you tried using a vpn, e.g. tailscale?
extremely easy to set up, if you are a selfhost purist, there’s headscale as a direct alternative.
only really good at doing stuff in a personal workspace, not really made for exposing to the public internet, still very possible tho
- someoneFromInternet@lemmy.mlEnglish2 years
how can I use vpn for it? I have another vps with both ipv4 and 6. But I can’t find solution for it.
- axzxc1236@lemm.eeEnglish2 years
Great, if you need to SSH into Ipv6 only machine, SSH has -J flag which can be used to specify “jump host” (basically run SSH through SSH)
- someoneFromInternet@lemmy.mlEnglish2 years
what if I want to host something on it? I need reverse proxy?
- axzxc1236@lemm.eeEnglish2 years
Host a website that needs to be accessible from your own machine or public?
Former situation: Can be solved by setup reverse proxy on the other VPS, or join machines to a VPN server (like tailscale, Zertoier or Wireguard server)
Later situation: Cloudflare or other CDN, setup reverse proxy on the other VPS.
Less accessible option but available for public: Tor or I2P
- someoneFromInternet@lemmy.mlEnglish2 years
here is problem: I don’t know how to set up wireguard and can’t find any good guides
- axzxc1236@lemm.eeEnglish2 years
Personally have good experience with https://github.com/Nyr/wireguard-install, there are other script that are available by searching “wireguard setup script github”.
Note: By default Wireguard config generated will route every bit of traffic through Wireguard (which will be slower and probably not wanted in this situation), to change that change AllowedIPs field in Wireguard config, lets say all your machines are assigned
1.2.3.xxxas IP address, to only access other1.2.3.xxxIP through wireguard, change the config toAllowedIPs = 1.2.3.0/24.- someoneFromInternet@lemmy.mlEnglish2 years
I just have to connect to my server with ipv6 through wireguard to get access to ipv6 on my client?
