SwizzleStick

They never asked me for that (UK here). Was up and running with just the basics in minutes. Are you on a list? 😅

They do have a waiting/payment cycle period on their server offering before they’ll open mail ports. Once you qualify, you still need to raise a ticket to ask. That was a bit annoying as my new ISP is stricter with the ports than prior, meaning I had to wait before my relay workaround could send mail.

Same setup here, Hetzner/Rclone with enc. Script runs daily on the NAS to beam everything up. Very happy.

Make at least one offline copy of what you need to decrypt and keep separate though. An inaccessible encrypted backup is no backup at all.

They are between builds.

B41 stable has been out for ages with multiplayer support. It’s the current version and what you get if you don’t opt in to experiential builds.

On unstable builds, the devs remove multiplayer initially until they think it’s good enough. B42 unstable is in active development and just recently added multiplayer support.

B42 is still a bug-ridden crapshoot though, stick with 41 if you want to play online.

Aye it’s on the list to try & potentially swap out when time allows. Probably over the holidays - no work until the new year after the 23rd, so no excuse really :)

It’s fine, did the job for me at the time. Just wanted the ad and nasty blocking. Keeping it and the filters up to date is easy.

Now have a pfSense box with pfBlocker-NG, which does essentially the same thing. Also runs Snort as an additional layer, and makes penning in IoT stuff possible.

Well it’s exactly what I asked for, can’t argue 😂

We settled on Puck for the name. It rhymes with what’s said when weird noises come from its direction…

Why not. I would love to see your detached robotic ass.

I printed special little stilts to raise one of our tables the 10mm extra it needed to be able to go under without getting wedged. It still tries fornicating with the cat tree - a different problem to solve.

Never lost it’s ass though, one to look out for there.

It would definitely be a size thing for adding Ethernet (PoE or otherwise) to small boards like these. The ones I am using are already bigger than they ought to be - the bottom half is just a glorified serial interface and power input for USB. The esp plugs into this through pin/header. If I were less lazy, they could be about half the thickness in a final product. No PoE I suppose also keeps them cheap, which is always good for me. The casings were my first ‘proper’ design and entry into resin printing.

The Tapo kit I have found to be a good balance of price, features and quality. I have a Tapo C310 mounted outdoors at another building, which has done great in all weathers. Initial setup does require the app/service last time I checked, but it can be made to serve RTSP locally after that. Very good for the ~£30 price point.

Eggs, baskets, and lessons being taught about how it’s not a good idea to heavily skew their ratio.

Ok so the combination is:

• This camera board
• This external antenna
• This project
• A shell I designed myself in SketchUp (skp download). Note that’s not the final version, as I lost some design files.

And the finished item:

All assembled, they will give a decent enough feed to frigate for the basics. Just don’t expect miracles in the resolution or framerate departments. 3fps does fine for my use case of tracking critters.

Gladly. I’ll collate a few bits later - time for work.

New to me & bookmarked. I am sure I have some crap lying around that this would work with.

Thank you!

For hardware, anything that can provide a local rtsp stream is a good place to start. I run cheap and cheerful mix of tapo, unbranded and homebrew esp32 cams. Offload the motion/object detection and alerts to something that can pull in the feeds, and isolate the cams to local network only.

WiFi usually ok, but at least hardwire the power to save future grief.

Using frigate to manage mine, which is running under Homeassistant - another project worth looking up.

A few images, featuring Freddie the visitor:

A redlib instance is also an option. Example: https://redlib.pussthecat.org/

Oh nee :((

It’s a Synology NAS so will work with the Synology DSM integration: https://www.home-assistant.io/integrations/synology_dsm

There’s definitely ways to poll the sensors of other devices though. I had some janky sensors set up before for monitoring a standard Linux box.

We’re doing fine here:

Aber Deutschland ist geschmolzen :(

On and off over the last 15 years or so.

Only recently have I become much more comfortable & able to resolve things without resorting to search, stackoverflow etc.

The turnover point was the day I finally learned vi & cron so I could fiddle with an old Buffalo NAS, that was long out of support, riddled with security holes, and offered only very limited tooling.

Was a great learning experience, but it didn’t pan out the way I wanted. So it runs Debian now, supports modern protocols, and continues to serve. Amazing what you can keep in service when you try.

Whatever way you go for setting up the systems themselves, I’ve found dwservice.net to be perfect for accessing systems with only a browser.

The host component is Mac, Windows and Linux compatible. The clients need only an account at DW. Hosts tied to your own account can be shared with others.

Depending on host OS, you get screen, terminal and fire transfer access. Sessions are logged if you need to review who’s accessed what.

Free. Donation optional.

I condensed down from a power hungry tower server to a couple of thinkstations and a nas. Much nicer on the power.